Albania CNC coil spring machine

CNC hot spring coiling machine is the main equipment for the production of large springs, responsible for the most important coil forming part of large springs in the production link, has the advantages of high production efficiency, less operators and low labor intensity.

Category:

AlbaniaSpring Machine

15933276111@163.com

Product Description

Equipment introduction

The function of the equipment is to heat the spring steel material with the wire diameter of 20mm to 100mm to 900 degrees to 1100 degrees, roll it into a cylindrical helical spring on the special mandrel, and remove the spring from the mandrel after the winding is completed, which can be formed at one time, and complete the required pitch and ring part of the spring at one time, and no manual secondary processing is required after the winding is completed. Heat treatment such as quenching can be carried out directly.

Device function

1. Two sets of servo motors respectively control the coil and pitch of the spring

2.G code programming, the control form is more flexible, the program can be stored, the production process can be controlled by programming, and the winding speed can be adjusted;

3. can flexibly control the end coil helix Angle and the pitch of the middle part, control the spring height, no manual intervention is required after the winding is completed;

4.reducer using servo special planetary reducer, large torque, high conduction efficiency, no refueling, life-long maintenance free:

5.automatic core-pulling shaft spring, automatic winding process;

6. the beginning and end do not need human intervention, can be directly quenched;

7. The equipment uses automatic oil pump to complete the lubrication of track and lead screw regularly.

Technical parameter

Serial number	Model number	Maximum wire diameter	Maximum outside diameter	Maximum height	Main servo power	remark
1	ZRH-50	50MM	400MM	1000MM	26KW	diaxial
2	ZRH-65	65MM	550MM	1200MM	30KW	diaxial
3	ZRH-80	80MM	650MM	1600MM	37KW	diaxial
4	ZRH-100	100MM	650MM	2000MM	55KW	diaxial