Slovakia Two-axis CNC Cold Coiling Machine

Large diameter CNC cold spring coiling machine is mainly used for small winding ratio, small batch spring winding, can be rolled in the state of non-heating, the maximum diameter of 35mm. Servo motor respectively control the number of spring coil and pitch, the control form is more flexible, the production process can be controlled by programming, the winding speed is adjustable; Multiple springs can be rolled in a single cycle and production can be achieved Counting, left and right rotation, automatic winding and pitch adjustment.

Category:

SlovakiaSpring Machine

15933276111@163.com

Product Description

Equipment introduction

Large diameter CNC cold spring coiling machine is mainly used for small winding ratio, small batch spring winding, can be rolled in the state of non-heating, the maximum diameter of 35mm. Servo motor respectively control the number of spring coil and pitch, the control form is more flexible, the production process can be controlled by programming, the winding speed is adjustable; Multiple springs can be rolled in a single cycle and production can be achieved
Counting, left and right rotation, automatic winding and pitch adjustment.

Device function

1. The equipment adopts double servo system control, CNC input spring parameters, through programming can automatically control the winding process and open coil

2. The equipment adopts G code programming, the control form is more flexible, the program can be stored, the production process can be controlled by programming, and the rolling speed can be adjusted;

3. The automatic oil pump completes the lubrication of the track and lead screw regularly.

Technical parameter

Serial number	Model number	Maximum wire diameter	Maximum outside diameter	Maximum height	Main servo power
1	SL-25	25MM	250MM	1500MM	18.5KW
2	SL-35	35MM	300MM	1500MM	22KW